英国NORGREN诺冠减压阀，B72G-2BK-QD3-RMN
6,3酒吧（90 psig）的进口压力保持规定的油zui大流量
F74C：16立方分米/秒（33.9 SCFM）
F74H：28立方分米/秒（59.3 SCFM）
手动排水连接：1/8“
自动排水连接：1/8“
自动排水工作条件（浮动式）：
大于0.3巴：关闭排水需要碗压力
小于0.2巴（3 PSIG）：开漏碗所需压力
所需的zui小风量，关闭漏：1立方分米/秒（2 SCFM）
手动操作：踩下脚排水口内排水碗
标称碗大小：0,2升（7液体盎司）
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and temperatures
can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified, for
non-industrial applications, life-support systems, or other applications not
within published specifications, consult Norgren
Through misuse, age, or malfunction, components used in fluid power
systems can fail in various modes. The system designer is warned to
consider the failure modes of all component parts used in fluid power
systems and to provide adequate safeguards to prevent personal injury or
damage to equipment in the event of such failure.
System designers must provide a warning to end users in the
system instructional manual if protection against a failure mode
cannot be adequay provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with these
Water vapor will pass through these units and will condense into liquid
if air temperature drops in the downstream system. Install an air dryer if
water condensation could have a detrimental effect on the application.

英国NORGREN诺冠减压阀，B72G-2BK-QD3-RMN