德国SICK施克安全继电器,C4MT-03634EAA03DE0
功能如果安装安全装置的半导体输出（例如C4000，S3000）通
电，安全输出触点将闭合。当安全装置中少个半导体输
出断电时，那么输出触点将返回到开路状态。如果需要重启
互锁装置，可以在安全装置里面实现，例如C4000或者S300
0。依据EN 954-1的类别3或者类别4需要对接触器进行监测。
这在连接的保护装置中有提供，例如C4000或者S3000。
UE10-3OS单元中的常闭触点(Y1-Y2)就是该接触
The pivoting mounting bracket is made
 of black anodised aluminium. It will be covered by
the device after mounting. The pivoting
mounting bracket provides adjustment for
correcting the horizontal alignment of
 sender and receiver by ±2.0° after mounting.
Tighten the bolts on the pivoting mou
nting bracket to a torque of between 5 and 6 Nm.
Higher torques can damage the bracket;
lower torques provide inadequate protection
德国SICK施克安全继电器,C4MT-03634EAA03DE0
器监测系统的部分。外部设备监测功能(EDM)
C2000(EDM/RES)型安全光幕连接到UE10-3OS安全继电器上
•4（IEC61496) PL e（ISO13849）
•坚固的外壳，且在外壳上有三条安装槽
•宽广的检测距离，zui远达到70米
•具备EDM、RES、ADO功能以及SDL总线
•可选的附加特性：集成激光对准器，LED指示灯
•通过PC和CDS软件进行系统设置
•配合UE403可直接连接Muting传感器，实现Muting功能
When mounting the rigid mountin
to adjust and lock the multiple light beam safety
When mounting the bracket, note the
 distance and the position of the sliding nuts as
described in chapter 13.3 “Dimensional drawings” on page 119f.
The mounting screw is not included in the delivery.